US$ 60.00
Square Single Channel 2-Hole Post Base - 304 Stainless Steel is a post base designed to fasten Strut Channel to the floor
These connectors are cast-in-place or wet-set in concrete
The black phosphate coating is traditional in drywall screws and is designed for use in dry interior environments only
The length of the bolt inside the anchor should not exceed 5"
Equipment supports in corrosive environments
3/4" Simpson MCR07512 Rebar Cutter Finish Nails Square Single Channel 2-Hole PostWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".
US$ 60.00
US$ 32.00
US$ 40.00
US$ 225.00
US$ 19.75
US$ 32.00
US$ 32.00